Wireless Telemetry Handheld Display Single Input (T24-HS)
View more videos on
Our YouTube Channel !
- Wireless radio telemetry handheld display for connection to a single T24 Acquisition Module
- Two key operation offering tare functionality
- Auto ‘power on’ and ‘power off’ of remote acquisition module
- Water-proofed to IP65 NEMA 4
- Simple wireless configuration and calibration
- Up to 200m (650 ft) range
- Photo on left showing the available accessory black leather carry case with clear viewing window shoulder strap
This wireless handheld display module provides an 8 digit LCD reading from any of the T24 Acquisition Modules (strain gauge, current or voltage). The remote acquisition module can be ‘powered on’ and ‘powered off’ automatically as the T24-HS handheld is operated. Status indicators inform the user if the remote acquisition module has input integrity problems, low battery, low signal, over range or other error.
The display can be toggled between gross and a tared value and can optionally be scaled to change measurement units.
The licence free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. FCC, ETSI and IC approvals
This handheld module uses a pair of standard alkaline AA batteries and is configured using free T24 Toolkit software which runs on a PC connected to a T24 base station.
This wireless handheld display is typically seen in applications requiring wireless loadcell measurement or wireless strain gauge display. To learn more about these applications please see our 'Industries' tab.
T24-HS
General Radio
| Parameter | Min | Typical | Max | Units | |
|---|---|---|---|---|---|
| Licence | Licence Exempt | ||||
| Modulation Method | MS (QPSK) | ||||
| Radio Type | Transceiver (2 way) | ||||
| Data Type | 250 | K bits/sec | |||
| Radio Frequency | 2.4000 | GHz | |||
| Power | 1 | mw | |||
| Range | 200 (650) | Metres (feet) * | |||
| Channels (DSSS) | 16 | ||||
| *Maximum range achived in open field site at height of 3 metres (9.8 feet) above ground. | |||||
| Electrical | |||||
| Power Supply Voltage | 2.4 | 3.0 | 3.6 | V DC | |
| Power Consumption | |||||
| Active | 35 | 40 | mA | ||
| Low Power Mode | 120 | 160 | uA | ||
| Estimated Battery Life Using 2AA Batteries: | |||||
| Standby mode (Powered off) | 1.5 | Years | |||
| Continuous Operation | 40 | Hours | |||
| Environmental | |||||
| IP rating | IP65 | ||||
| Operating Temperature | -10 | +50 | C | ||
| Storage Temperature | -40 | +85 | C | ||
| Humidity | 0 | 95 | %RH | ||
| CE Environmental Approvals | European EMC Directive 2004/108/EC | ||||
.jpg)
Software
Product order options
| T24-HS | Code |
|---|---|
| Simple Handheld | T24-HS |
| Accessories | Code |
| Black leather carry case with clear viewing window with shoulder strap | TR100-CA |
These are the following industries and applications in which this product has been used:
- Lifting & Handling - Wireless Crane Load Pin
Wireless Telemetry Strain Gauge/Wireless Load Cell Acquisition Module
Wireless Telemetry Acquisition Enclosure
Wireless Telemetry 2KHz Strain Gauge Acquisition Module
- Q: What batteries are required?
A: 2 x AA, Alkaline, Zinc or Rechargeable NiCad, NiMH.
- Q: Are they IP or NEMA rated?
A: Yes to IP65 NEMA4.
- Q: What is the battery life of the handhelds?
A: 40 hours continuous use.
- For more 'Frequently Asked Questions' please see our Knowledge Centre
- Q: What is the difference between the T24-HS, HA & HR handhelds?
A: The T24-HS provides easy one-to-one communication with a single acquisition module.
The T24-HA advanced provides communication with up to 12 acquisition modules providing both individual and resultant values, as well as the ability to transmit data to other output devices using the F1 function key.
The T24-HR roaming will acquire data from any number of acquisition modules in range, offering the most powerful (nearest) one for display first.
