Battery Charger for T24 Acquisition Modules (T24-BC1)
This module is a battery charger and power supply suitable for the T24 range of telemetry acquisition modules.
From a 5 Volt supply the module produces a regulated 3.3V for the acquisition module and can also charge a suitable Li-ion Battery.
| Parameter | Min | Typical | Max | Units |
|---|---|---|---|---|
| Supply Voltage | 4.1 | 5 | 6 | V |
| Regulated Voltage Output | - | 3.3 | - | V |
| Battery Positive Connection | - | 3.7 | - | V |
| Maximum Cable Length | - | - | 150* | mm |
| Dormant PCB Current | - | 1.7 | μA |
* 07/02 gauge wire attached to maximum load i.e. T24-SA with four 350 Ohm strain gauges.
Note: LED will only be lit when an input voltage is applied.
Battery Options
| Varta LIP653450 | |
|---|---|
| Rated Capacity | 1100mAh |
| Dimensions | 35 x 54 x 7mm |
| Weight | 20g |
| Charge Time | 3hrs @ 466mA |
| Battery Life T24-SAi & e | 1 month 25 days* |
| Varta LIC18650 | |
| Rated Capacity | 2200mAh |
| Dimensions | 18.25 Diameter 65mm Height |
| Weight | 46g |
| Charge Time | 4.5hrs @ 466mA |
| Battery Life | 3 months 20 days* |
| UBC 581730 | |
| Rated Capacity | 250mAh |
| Dimensions | 18 x 31.5 x 5.8mm |
| Weight | 6.5g |
| Charge Time | 2hrs @ 133mA |
| Battery Life | 7 days* |
* Note: Battery life is calculated with a T24-SA running in low power mode with a sample time of 5mS and transmit interval of 333mS for 2 hours out of every 8 hours, to a 1k Ohm bridge.
Documents
Software
No relevant software available
Product order options
| T24-BC1 | Code |
|---|---|
| Battery Charger | T24-BC1 |
These are the following industries and applications in which this product has been used:
- Civil Engineering - Wireless Monitoring of Bridge Structures
- Construction - Wireless Monitoring of Building Foundations
Wireless Telemetry Strain Gauge/Wireless Load Cell Acquisition Module
T24-SA
Wireless Telemetry 2KHz Strain Gauge Acquisition Module
T24-SAf
