Indicator For Temperature, 0-10V, 4-20mA, Speed and Potentiometer (SMP)
- Large LCD display and keypad
- Wide range of plug in input modules that provide transducer excitation
- Fully isolated 4-20mA and 0-10V analog outputs
- Setpoints and event handling using digital inputs and 2 x SPCO relays
- PID control capability, peak hold, measurement in any engineering units
- Fully digital set-up and calibration using built-in LCD display and keypad or comms
- High accuracy and high stability over a wide temperature range
- RS232 or RS485 communications for setup, data transfer or label/ticket printing
- IP65 / NEMA4 ABS bulkhead mounting enclosure
- AC or DC power supply options
The SMP versatile indicator / controller is a very flexible digital indicator and display system in a wall or surface mounting format, for use with a wide range of sensors and transducers, including volts, amps, temperature, frequency, speed, load, force, pressure, torque, LVDT, RVDT and many more.
The digital architecture offers very easy one-pass calibration and fast setup.
This versatile device offers options of isolated analogue outputs, latching relays or digital outputs for control or alarm functions.
The RS232 or RS485 options provide for digital communications (including setup) and can support label or ticket printers.
For a panel mount or DIN rail mount version, see model ADP15 Versatile Indicator /Controller
For a wireless telemetry version, see models T24-SO and SERIALDIS Radio Telemetry Display Module.
| Inputs | |
|---|---|
| Input Modules Available | |
| UADCV1 | 0 to 10V |
| UADCA1 | 0 to 20mA |
| UADCV2 | ± 200mV |
| UALV1 | LVDT |
| UALV2 | Dual LVDT |
| UARTL | Rate/Totaliser |
| UAT1 | K Type Thermocouple |
| UAT2 | J Type Thermocouple |
| UAPT | Resistance Thermocouple (PT100) |
| UAFLC | Fast (10mS) Strain Gauge |
| UADIA | Dual Channel 4 to 20mA Input - (speed 800mS per Channel) |
| UADIV | Dual Channel 0 to 10V Input - (speed 800mS per Channel) |
| UA12C | Remote Driver |
| Input Resolution | 15 bit/4.5 digits |
| Contact Inputs | Are available for print and peak hold reset and are volt free |
| Analogue Outputs | |
| Type | 4-20mA and 0-10V DC |
| Drive | 4-20mA up to 1Kohm and 0-10 volts up to 2mA. |
| Accuracy | 4-20mA + 0.15% of range, typical. 0-10V ±2% before calibration. |
| Resolution | as for display up to 13 bits/4.5 digits. Settling time 350mS to within 1% of step change. |
| Isolation | ±130V RMS or DC max to analogue input or any other port. |
| Fast Analogue Output | For use with the UAFLC |
| Power Supplies | |
| 110V-120V AC or 220/230V AC 50-60Hz 10W, 9-32V DC 10W isolated | |
| Data Retention/Protection | |
| Retention | 10 years for set up values, minimum of 100,000 write cycles. |
| Protection of data and function(s) |
Watchdog timer giving repeat auto resets. Impending power detection and hold off. Keypad security and time out. |
| Other Options & Accessories | |
| 2 Set Points | Output through 5A, 230V AC SPCO relays, with a latching option |
| Communications Port | For data transfer or print via :- |
| 20mA loop | Enabling up to 254 units to be multi dropped to 1 x RS232 via IF25 interface(s) |
| RS485 | Enabling up to 25 units to be multi dropped |
| RS232 | For 1 to 1 connection and standard printer drive |
| Printer Operation | By front panel function key |
| Baud Rates | 300, 600, 1200, 2400, 4800, 9600 (19200 MANTRABUS only) 9600 for MODBUS |
| Back Lighting | For the LCD display |
| DIN Rail Mounting | For the CPU, PSU and output option modules |
| DC Powering | 9-32V DC |
| Remote Mounting | Display module, for panel mounting |
| Environmental | |
| Storage Temperature | -20 to +70ºC |
| Operating Temperature | -10 to 50ºC |
| Relative Humidity | 95% maximum non condensing |
| CE Environmental Approvals | European EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC |
Documents
Software
No relevant software available
Product order options
Please read the following before selecting the options for this product:
The SMP is a PCB with CPU and Analog Outputs 4-20mA/O – 10V which can be either ABS Cased or Din Rail mounted.
Starting with the Base Unit select the SMP you require followed by the options you need to configure the device to meet your needs.
| Base Unit | Code |
|---|---|
| Cased PCB optional plug-in inputs, with an LCD,(comprising UAB-LAC-LCD) | SMP/C |
| Din Rail mounted PCB with optional plug-in inputs, separate stainless steel mounted LCD, (comprising UAB-LCD-LCS-D2) | SMP/D |
| Cased PCB. Used in conjunction with high resolution and dual inputs only, (comprising UAB/EX-LAC-LCD) | SMP/C/EX |
| Din Rail mounted PCB. Used in conjunction with high resolution inputs only, (comprising UAB/EX-LCD-LCS-D2) | SMP/D/EX |
| Inputs | Code |
| UAB Input Module 0-10V | UADCV1 |
| UAB 0-20mA Input Module | UADCA1 |
| UAB/RUA LVDT Input Module | UALV1 |
| UAB Temperature: Type K | UAT1 |
| Temperature: Type J | UAT2 |
| UAB/RUA Temperature: PT100 Input Module | UAPT |
| UAB/RUA Rate/Total Module | UARTL |
| UAB/RUA Dual LVDT Input Module | UALV2 |
| UAB Dual Input 4-20mA | UADIA |
| UAB Dual Input 0-10V | UADIV |
| Outputs | Code |
| Universal Amplifier Fast Analogue Output | UAFAO |
| Comms | Code |
| Communications -20mA Current Loop Comms Port | LC1 |
| LCA15 RS232 Comms Port | LC2 |
| RS485 Comms | LC3 |
| Relay | Code |
| Relay Module 2 SPs SPCO 5A | LR1 |
| Power Supplies | Code |
| AC Power Supply | LS1 |
| 9-30V DC Power Supply | LS3 |
| Display | Code |
| Surface Mount Display Board | LCD |
| Surface Mount Display Board with Backlight | LCD/BL |
| Surface Mount Display Board with Driver | LCDR |
| Surface Mount Display Board/ Drv/B Light | LCDR/BL |
| Hand Held Programmer for High Res Input | LP3 |
| Mounting Enclosure | Code |
| ABS IP65 Case and Mountings | LAC |
| DIN Rail Mounting Fixture | D2 |
| Extended Mounting | Code |
| Stainless Steel Panel for LCD | LCS |
| Accessories | Code |
These are the following industries and applications in which this product has been used:
- Industrial Processing - Chlorine and pH Levels in Water Treatment Plant
Supplying a global market
